When patients are mechanically ventilated, the airways are subjected to dry and cold air. This causes potential dry nose/throat issues, and/or inflammation of the airways.
To prevent these issues, the air is humidified using a pass-over humidifier. It's very important that this heated and humidified air does not cool down and cause condensation in the circuit connecting the humidifier to the patient.
This is prevented by incorporating a heating system into the wall of the ventilation tubing, thus maintaining the air temperature at a pre-set level and preventing condensation.
Based on our core competence of designing, developing and manufacturing highly functional plastic tube systems, we have developed a proprietary technology platform.
Through this platform, we have developed a number of innovative breathing circuits. Most notably, we have developed ventilation tubings that have a heating system incorporated into the wall, also referred to as Embedded Heating Wire Circuits (EHWC).
Our non-heated ventilation tubing is designed for patients who need mechanical ventilation (CE marked).
Our typical clients are OEMs and Distributors / Manufacturers.
Our non-heated breathing tubes are used during mechanical ventilation, with or without active / passive humidification.
Our non-heated ventilation tubing is low-flow resistant and high-crush resistant.
Our non-heated ventilation tubing is spiral reinforced and has smooth interior tubing.
DOWNLOAD TECHNICAL INFORMATION
Our heated ventilation tubings (FDA 510(k) approved and CE marked) are used to build (single and dual limb) heated breathing circuits for Fisher & Paykel's MR850 humidifier.
Fisher & Paykel's MR850 humidifier delivers humidified air to patients' airways to maintain the natural balance of heat and moisture during mechanical ventilation.
We also produce custom-made heated circuits for your specific needs / humidifier.
Our typical clients are OEMs and Distributors / Manufacturers.
Our heated ventilation tubing prevents condensation of water on the wall of the breathing circuit, while maintaining the temperature of the air delivered to patients' airways.
Our ventilation tubing is low-flow resistant and high-crush resistant, with heating wires incorporated into the spiral construction for optimal heating and optimal humidification.
Our ventilation products are spiral reinforced and have smooth interior tubing, with heating wires incorporated into the spiral construction. Our tubings have different diameters and/or lengths depending on the patient population needs (neonatal, pediatric, adult).
Upon request, we can design, develop and manufacturer specific intelligent tubings, incorporating heating, sensing and other functionalities.
DOWNLOAD TECHNICAL INFORMATION
Our aspiration catheters are designed to provide safe and efficient airway suctioning. Developed with advanced technologies and certified EU materials, they ensure high performance and reliability in everyday clinical practice.
Our aspiration catheters are designed for healthcare professionals, including hospitals, clinics, and distributors specializing in respiratory care solutions.
Aspiration catheters are used for aspiration of secretions from the nose, throat or lungs, helping patients maintain a clear airway and supporting effective respiratory therapy.
Wide product range tailored to diverse clinical needs:
Certified EU-sourced materials and advanced manufacturing processes
Full in-house production: from component manufacturing to assembly and packaging, ensuring consistent quality.
Contact:
sales@tik.si
